How to Turn Off Driver Signature Enforcement on Windows 11/10?

What is Driver Signature Enforcement?

Driver Signature Enforcement is a feature of Windows operating systems, securing our computers from installing unsigned drivers,, including Windows 11,10, 8, and 7. The Driver Signing process associates a digital signature to a driver’s package. Windows devices use these digital signatures to verify the driver packages and the vendor’s identity who provides the driver packages.

An electronic security mark certifies the publisher for the driver and all other relevant information. Windows will refuse to run them, known as “Driver Signature Enforcement,,” if Microsoft doesn’t approve a driver.

You may install drivers from any source such as Windows Update, Original Equipment Manufacturers, a third-party driver download software, etc. Microsoft must digitally verify these drivers via a digital signature.

Typically, you don’t require to disable driver signature enforcement. Moreover, suppose you have some old hardware drivers that Microsoft does not digitally sign and want to install on your PC. In that case, you may wish to disable driver signature enforcement.

This risewindows article will guide you on how to disable Driver Signature Enforcement on Windows 11/10.

How to Turn Off Driver Signature Enforcement on Windows 11/10 using the Advanced Boot menu?

Use the below-given steps to disable Driver Signature Enforcement on Windows 11/10 using the Advanced Boot Menu:-

Step 1. You need to click on the Start button on the taskbar, hold down Shift button and then click on the Power button. After that, click on the Restart option.

Restarting-Windows-11-by-pressing-Shift-button-962x1024Step 2. Your Windows machine will reboot with “Advanced Options.” Next, select the Troubleshoot tile in the list.

TroubleshootStep 3. After that, click on the Advanced Options tile.

Advanced-options-1Step 4. Then, select Startup Settings under the “Advanced Options.”

Advanced-options-Startup-SettingsStep 5. Now, click on the Restart button to reboot your computer.

Startup-Settings-RestartStep 6. Next, you will see the “Startup Settings” on your screen. Press the number 7 key on the keyboard to activate the “Disable driver signature enforcement” option.

Disable-driver-signature-enforcement-1024x768Your PC will restart with driver signature enforcement disabled when you are done. You can now install unsigned drivers on your Windows system.

How to Disable Driver Signature Enforcement on Windows 11/10 through Command Prompt?

This method is only valid when UEFI’s Secure Boot function is disabled.

Use the below-mentioned steps to disable Driver Signature Enforcement on Windows 11/10 through the Command Prompt:-

Step 1. You need to open the Command Prompt with administrative rights.

Step 2. Now, type the following command and then press the Enter key from the keyboard:-

bcdedit.exe /set nointegritychecks on

Command-to-disable-driver-signature-enforcement-1024x580The Driver signature enforcement on your Windows device is disabled now.

You need to execute the following command in the administrative command prompt window to enable this feature again:-

bcdedit.exe /set nointegritychecks off

That it for this method.

How to Disable Driver Signature Enforcement on Windows 11/10 by Enabling Test Signing Mode?

This method is applicable for those computers where the Secure Boot function is disabled on UEFI.

Use the below-described steps to disable Driver Signature Enforcement on Windows 11/10 by Enabling Test Signing Mode:-

Step 1. You need to open the Command Prompt with administrative rights.

Step 2. Now, type the following command and then press the Enter key from the keyboard:-

bcdedit /set testsigning on

Test-signing-command-1024x582Step 3. Next, restart your computer to enter into test mode.

You will notice a “Test Mode” watermark in the bottom right corner of your computer screen when you complete the above steps. This indicates restrictions have been removed and you can install unsigned or not verified drivers.

Test-Mode-Watermark-on-Windows-11-1024x746Use the following command in the elevated Command Prompt window to exit from the test mode:-

bcdedit /set testsigning off

Driver Signing is a security feature on Windows that protects your system as said before. You must enable this feature as soon as possible when troubleshooting or installing unsigned drivers is over.

Leave a Reply

This site uses Akismet to reduce spam. Learn how your comment data is processed.

%d bloggers like this: