How to Prevent Computer Overheating and Keep your PC Cool?

Your computer is made up of many parts, almost all of which generate heat when the computer is turned on. Some components, like the CPU and graphics card, can get so hot that you could boil on them. In a properly configured desktop or laptop computer, multiple fans dissipate much heat outside the computer case.

If your computer doesn’t remove hot air quickly enough, the temperature can become so high that it can seriously damage your PC. Cooling your laptop should be a priority. Below are solutions to cool down your computer that anyone can do on their own. Many of them are free or very inexpensive, so there’s no excuse for your computer to overheat and crash.

Inside your computer are fans that provide cooling. If the vents of these fans are blocked, the air cannot circulate properly, and the laptop overheats. Make sure your computer’s vents have enough free space. This may include the surface your computer sits on. For example, if you use your laptop in bed and put it on a blanket, it will block the computer’s ventilation. Use your laptop on a hard, flat surface for best results so it can “breathe.”

You can buy a cooling pad that acts as an external fan for your laptop. They are usually inexpensive and plug directly into your computer, often through the USB port. Keep in mind, however, that while cooling pads can cool the exterior of your laptop, they don’t have as much of an impact on the computer’s internal heat sources.

This risewindows article presents some of the best laptop cooling software that monitors system temperature and provides a detailed system temperature report. Also, you must know how to configure the system cooling policy based on power options.

Best Laptop Cooling Applications for Windows 11/10

CPUID HWMonitor

It is a free, state-of-the-art cooling program that monitors the temperature of your entire system. Once operational, the software generates a detailed temperature report about the CPU, hard drives, and even the motherboard. The software monitors embedded sensor chips and thermal sensors for monitoring system temperature. It also monitors the GPU and S.MA.R.T. to generate the hard disk temperature report. It is free to use the service and supports all processors and versions of Windows.

You can download the latest version of HWMonitor from its official website.

SpeedFan

SpeedFan is one of the best freeware apps over the internet that lets you monitor voltage, fan speeds, and temperatures on Windows 10. It comes with an easy-to-use graphical tool for laptop cooling and hardware monitoring. It is one of the recommended software that monitors the system temperature using inbuilt digital sensors housed in your system. This application provides a detailed report on system temperature that assists in system analysis and aids in taking some basic precautions to avoid a future disaster. It helps you automatically adjust CPU fans’ speed by monitoring the motherboard’s temperature and other system hardware, thus helping remarkably keep the laptop cool.

It features various temperature sensors and hardware monitoring chips and runs smoothly in all Windows system versions. Furthermore, this software offers an easy customization setting to manage heavy loads and analyze unpredictable reboots. You can download the latest SpeedFan version from the official website.

Core Temp

It is another powerful software program that lets you monitor the CPU temperature. This software also generates a detailed report of each CPU core and its related temperature readings. Core Temp will show all the recent processors, temperature sensors, and most of the hardware chips.

The software’s generated reports are based on the system’s inbuilt Digital Thermal Sensor that assures respective readings are nearly accurate. It works on the system with AMD, Intel, and VIA x86-based processors and is supported by all Windows versions. You can download the free Core Temp latest version from the official website.

Activating System cooling policy using Power Options

If you don’t prefer to use a third-party app can enable a System cooling policy for laptop cooling. To monitor the cooling, you need to customize the power plan settings. An easy tweak will improve cooling.

How to enable active power cooling for your computer?

Step 1. First, click on the Start button. Then, type “Edit Power Plan.”

Step 2. Now, click on “Edit Power Plan” from the available results to open it.

Step 3. After that, on the “Edit Plan Settings” window, click on the link “Change advanced power settings.”

Step 4. So, under Power Options, scroll down to find “Processor power management.” Expand “Processor power management“ > “System cooling policy.” Next, select the “Active” option from the drop-down for “On battery” and “Plugged in,” as per your choice.

After completing all the steps, your laptop should work more efficiently as it will not be overheated.

That’s it for the article.

You guys are amazing; keep reading, learning & growing.

Good luck.

Leave a Reply

This site uses Akismet to reduce spam. Learn how your comment data is processed.

%d bloggers like this: