Your internet and networking activities are connected to a specific number of internet connections called an IP (Internet Protocol) address. In essence, it is a potent technology that uses the Internet to link machines together.
In this risewindows post, we’ll go over a few quick procedures for seeing, renewing, setting, changing, and using a static IP address on your Windows 10 computer.
How to view our PC IP address?
Use the following steps to know about your computer IP address to communicate with other devices:-
Step 1: On a Windows 10 computer, click on the
Step 2: To open the Command Prompt, click on the top entry in the list of results.
Step 3: Type the following into the Command Prompt window that appears and press Enter:-
When you run the mentioned command, it will display every IP address set up on every Ethernet and WiFi card.
The built-in Windows programme IPConfig displays the current TCP/IP network configuration values and updates DNS and DHCP (Dynamic Host Configuration Protocol) settings.
How do Renew my computer IP address?
In the Command Prompt, execute the following commands one by one to refresh or renew the IP address:-
It should be noted that the ipconfig /release command deletes your PC’s DHCP IP address, whereas the ipconfig /renew function obtains a new IP address.
How to set a static IP address on Windows 10?
Use the following steps to configure a static IP address on Windows 10 computer:-
Step 1: Open the Settings app by clicking on the
Step 2: Select the
Step 3: Select the
Step 4: Select
Step 5: The “Network Connections” window opens after you have finished the previous steps. Here, you can see every network card.
Step 6: Click on the
Step 7: Highlight “Internet Protocol Version 4 (TCP/IPv4)” in the “Properties” dialogue box by clicking on it, then choose the
Step 8: A dialogue box titled “Internet Protocol Version 4 (TCP/IPv4) Properties” appears.
Here, you can configure or set your preferred DNS server and static IPv4 address that you received from your internet service provider.
The computer is set up by default to automatically receive an IP address (DHCP), but you can alter it if necessary. Simply choose “Use the following IP address,” provide the necessary information, and click on
Activate the checkbox next to “Validate settings upon exit” to launch network diagnostics and validate the connection automatically.
Fill in the appropriate information, such as the subnet mask, default gateway, preferred DNS server, backup DNS server, etc. if your computer is connected to more than one network.
That is it.
You guys are amazing; keep reading, learning and growing.